6 min read

Strip Lashes for Beginners: Trimming, Adhesive and Application

A beginner-friendly guide to mastering strip lashes, from trimming the band to applying adhesive and securing the perfect fit.

Strip Lashes for Beginners: Trimming, Adhesive and Application

Enhancing your gaze with strip lashes is one of the most transformative yet accessible beauty techniques. While the prospect of applying false lashes can seem daunting to beginners, mastering this skill requires only a little patience, a steady hand, and the right sequence of steps. With a beautifully organised vanity table and the gentle, natural light of morning, taking the time to practise this art can become a calming ritual. Once you understand the fundamentals of selecting, customising, and applying lash strips, you can effortlessly elevate your daily makeup or create a striking look for special occasions.

Choosing the Perfect Strip Lashes for Your Eye Shape

Before diving into the application process, it is essential to choose the right pair of strip lashes. False lashes come in various lengths, densities, and band materials. For beginners, a flexible, thin, or clear band is highly recommended. Clear bands bend more easily to fit the natural curve of your eyelid, making the application process much more forgiving.

Consider your eye shape when selecting lashes. If you have round eyes, wispy lashes that are longer in the outer corners can create a beautiful winged effect. For almond eyes, almost any style works well, but lashes that are longest in the centre can open up the eyes significantly. If you have hooded eyes, look for lashes that feature longer fibres in the middle to create depth. Choosing a natural, lightweight style for your first few attempts will make handling the lashes much easier and ensure a comfortable wear throughout the day.

Measuring and Trimming: The Key to Comfort

One of the most common mistakes beginners make is applying strip lashes straight out of the packaging. Standard lash strips are designed to fit a wide range of eye sizes, meaning they are usually too long for most people. An untrimmed lash band can poke the inner corner of your eye, causing watering, discomfort, and premature lifting.

To measure the lash, gently remove it from the tray using your fingertips or a pair of tweezers. Do not pull from the delicate lash hairs; instead, peel the band gently from the outer edge. Place the strip along your natural lash line, starting a few millimetres away from the inner corner of your eye. Note where the strip ends on the outer corner. Ideally, the lash should stop just before your natural lash line ends to avoid dragging the eye downwards.

Once you have determined how much needs to be removed, use small, sharp beauty scissors to trim the excess. Always trim from the outer edge of the lash band, as the inner corner is designed with shorter hairs to blend seamlessly with your natural lashes. Cut a tiny section at a time, and re-measure if necessary. It is far better to trim too little and adjust than to cut off too much at once.

Selecting and Applying Lash Adhesive

The adhesive you choose plays a vital role in how easily your lashes go on and how long they stay in place. Lash glues generally come in two main varieties: clear-drying and dark. For beginners, a latex-free adhesive that goes on white or iridescent and dries completely clear is the safest option. This allows you to see exactly where the glue is placed and hides any minor application errors once dry. Dark adhesive blends well with black eyeliner but requires a more precise hand, as any smudges can disrupt your eyeshadow.

Applying the adhesive requires a delicate touch. Run a very thin, even layer of glue along the edge of the lash band. Pay extra attention to the inner and outer ends of the band, as these areas are prone to lifting; you can apply a tiny extra dot of adhesive to these points. The most critical step is waiting. Do not attempt to apply the lashes immediately after putting glue on the band. Wait approximately thirty to forty seconds until the adhesive becomes tacky. If the glue is too wet, the lash will slide around your eyelid, creating a mess and refusing to stick.

Step-by-Step Lash Application Technique

With your lashes trimmed and the adhesive perfectly tacky, you are ready for the application. Position yourself in front of a mirror. Instead of looking straight ahead, place a small mirror on a flat surface below your face and look down into it. This angle stretches the eyelid slightly and gives you a clear view of your natural lash line.

  • Step 1: Position the Lash: Using tweezers or a dedicated lash applicator, grip the strip in the centre, close to the lash band. Look down into the mirror and place the centre of the strip onto the middle of your natural lash line. Aim to get as close to the roots of your real lashes as possible, but avoid sticking the band directly to your eyelid skin if you can.
  • Step 2: Secure the Outer Corner: Once the centre is anchored, release your grip with the tweezers. Gently pick up the outer end of the lash strip and press it down onto the outer corner of your lash line.
  • Step 3: Secure the Inner Corner: Finally, grab the inner corner of the lash strip and press it gently into place, ensuring it sits comfortably away from the tear duct.
  • Step 4: Blend and Set: Use your fingertips or the back of your tweezers to gently squeeze your natural lashes and the false strip together. This fuses them into a single, cohesive layer, eliminating any visible gaps.

Gentle Removal and Lash Aftercare

To ensure your natural lashes remain healthy and your strip lashes can be reused, proper removal is essential. Never pull or rip the lashes off at the end of the day, as this can pull out your natural eyelashes and damage the delicate skin around your eyes. Instead, soak a cotton pad in a gentle, oil-based makeup remover or micellar water. Hold the damp pad over your closed eye for a few seconds to break down the adhesive. The strip should then slide off effortlessly.

Once removed, place the lashes on a clean surface. Use tweezers to carefully peel away any remaining glue buildup from the band. Store them back in their original tray to maintain their curved shape, ready for your next application.